Bearing storage should pay attention to the problem

Release time: 2022-11-04

As long as the relative humidity in the storage room does not exceed 60% and the temperature does not change much, the bearings can be stored in the original packaging for several years. Sealed bearings or bearings with dust cover, after long-term storage, the lubrication characteristics of the grease filled in the bearing may be reduced. The storage room should also prevent vibration and shaking.

Bearings not stored in the original packaging should be properly stored to prevent corrosion and pollution.

Large rolling bearings can only be stored flat, the sides of the inner and outer rings are best supported. If stored upright, due to the inner and outer ring and rolling parts are heavy, while the inner and outer ring wall is relatively thin, may cause permanent deformation.

Keywords:

Back

Related news